Hand Brake Lever - Husqvarna FC 250 2016 Repair Manual

Checkin the free travel of the hand brake lever
Warning
Danger of accidents
If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit.
-
Set the free travel on the hand brake lever in accordance with the specification.
16.4 Adjusting the basic �osition of the hand brake lever
-
Add brake fluid up to level f).
Guideline
Level f) (brake fluid level
below reservoir rim)
I
Brake fluid DOT 4
-
Position cover@ with membrane@).
-
Mount and tighten screws
• Info
I
Clean up overflowed or spilled brake fluid immediately
with water.
H00294-10
The brake system fails in the event of overheating.
-
Push the hand brake lever forward and check free travel f).
Free travel of hand brake
lever
If the free travel does not match the specification:
-
Adjust the basic position of the hand brake lever.
(llill
Preparatory work
-
Check the free travel of the hand brake lever.
16
5 mm (0.2 in)
(llill p. 280)
O.
2-: 3 mm (2-: 0.12 in)
p. 137)
BRAKE SYSTEM
41
(� p. 137)
137