Removing The Start Number Plate; Installing The Start Number Plate - Husqvarna FC 250 2016 Repair Manual

Removing the start number �late
Installing the start number �late
O.
-
Remove screw Swivel the start number plate to one side.
-
Remove screw @ and take off the brake line guide and start
number plate.
-
Position the brake line and brake line guide on the start num­
ber plate.
Mount and tighten screw
-
Position the start number plate.
✓ The holding lugs engage in the fender.
-
Mount and tighten screw @.
13 MASK, FENDER
O.
109