Starter Drive, Removing; Removing The Suction Pump - Husqvarna FC 250 2016 Repair Manual

17 ENGINE
17.3.15
17.3.16
172

starter drive, removing

Removing the suction pump

8
-
Insert special tool into the crankshaft.
I Protection cap (75029090000)
Attach special tool @) to the rotor. Hold it tight using the
special tool and pull off the rotor by turning the screw in.
I Extractor (79229032044)
Info
Ensure that the woodruff key remains in place.
O
-
Remove screw with the washer.
-
Take off starter idler gear @ .
-
Take off freewheel gear @) .
O.
-
Remove screws
-
Take off oil pump cover @ .
(I!!;! p. 291)
(I!!;! p. 294)
..