Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
6.5
6.6
16
Removing the fork legs
lnstallin the fork le s
402556-10
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
O
-
Remove screws
and take off the clamp.
8
-
Remove screws
and take off the brake caliper.
-
Allow the brake caliper and brake line to hang tension-free to
the side.
Info
Do not pull the hand brake lever when the front wheel
is removed.
-
Loosen screws (D. Take out the left fork leg.
e.
-
Unscrew screws
Take out the right fork leg.
Main work
-
Position the fork legs.
O
✓ Bleeder screws
Info
The rebound damping is located in right fork leg REB
(red adjusting screw). The compression damping is
located in left fork leg
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the top edge of the upper triple
clamp.
(�
p. 12)
(�
p. 12)
(�
p. 112)
are positioned toward the front.
COMP
(white adjusting screw).
Advertisement
Table of Contents
