Installing The Camshafts; Installing The Timing Chain Tensioner - Husqvarna FC 250 2016 Repair Manual

17.5.23

Installing the camshafts

8
I
17.5.24

Installing the timing chain tensioner

-
Pull up the timing chain and insert the intake camshaft
-
Place the timing chain over the camshaft gear of intake
camshaft.
tl
✓ Marking is positioned and is aligned with the edge of
the cylinder head.
8
Ensure that bleeder is correctly positioned.
-
Slip in exhaust camshaft
-
Place the timing chain over the camshaft gear and position
the camshaft in the bearing seat.
tl
✓ Marking is positioned and is aligned with the edge of
the cylinder head.
-
Clean all oil nozzles thoroughly and blow out with
compressed air.
-
Mount the camshaft bearing bridge.
• Info
I
Ensure that the dowel pins are seated properly.
C,.
-
Position guide rail
0
-
Mount screws and tighten from the inside to the outside.
Guideline
Screw, M7x1
camshaft
bearing bridge
-
Position timing chain tensioner
8.
ring
8.
14 Nm (10.3 lbf ft)
Lubricated with engine
O
and insert it with new 0-
17 ENGINE
0-
oil
227