Disassembling The Seal Ring Retainer - Husqvarna FC 250 2016 Repair Manual

9 SHOCK ABSORBER, SWINGARM
9.16
64

Disassembling the seal ring retainer

Main work
-
Clamp the piston rod with the fork in a vise.
Guideline
I Use soft jaws.
O.
-
Remove nut
8.
-
Remove washer
-
Remove rebound shim stack@).
• Info
I
Place the rebound shim stack onto a screwdriver and
set it down as a unit.
C,.
-
Remove piston
-
Remove compression shim stack
Info
Place the compression shim stack onto a screwdriver
and set it down as a unit.
-
Remove rebound washer (D.
-
Remove seal ring retainer@.
@)
-
Remove locking cap
Preparatory work
-
Remove the spring.(� p. 61)
-
Disassemble the damper.
-
Disassemble the piston rod.
0.
0.
and rubber buffer
(� p. 62)
(� p. 63)
..