Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
6.24
36
Installing the lower tri�le clam�
402556-11
Main work
-
Clean the bearing and sealing elements, check for damage,
and grease.
I High viscosity grease
(I!!:!
-
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
-
Check whether upper steering head seal
tioned.
8
-
Slide on protective ring
-
Position the upper triple clamp with the handlebar.
C,
Mount screw
but do not tighten yet.
-
Position the fork legs.
0
✓ Bleeder screws
are positioned toward the front.
Info
The rebound damping is located in right fork leg REB
(red adjusting screw). The compression damping is
located in left fork leg
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the top edge of the upper triple
clamp.
p. 282)
O
is correctly posi
@).
and O-ring
(white adjusting screw).
COMP
Advertisement
Table of Contents
