Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
22
R00028-10
•
I
R00029-10
Disassembling the iston rod
Info
The steps are identical for both fork legs, except for the hydrostop needle and valve.
-
Degrease the cartridge and clamp it with the special tool.
I Clamping stand (T14049S)
-
Release seal ring retainer
-
Remove lock ring (D.
-
Pull reservoir @ out of the cartridge.
@)
-
Pull sleeve
out of the reservoir.
-
Remove spring@) with preload spacers@).
-
Remove seal rings G!) and O-ring
48.
-
Remove pilot bushings
Preparatory work
-
Disassemble the fork legs.
-
Remove the spring.
(l!!l
p. 20)
-
Disassemble the cartridge.
(l!!l
p. 299)
0
and remove with the washer.
G,.
(l!!l
p. 18)
(l!!l
p. 21)
..
Advertisement
Table of Contents
