Table of Contents
Advertisement
User Guide
Revision History
Date
November 2017
November 2017
December 2017
January 2018
January 2018
April 2018
May 2018
June 2018
Revision
1.0
Initial release
1.1
• The crossbar on the CMA was changed. See
• Removed Lowline power specs from
19).
• Changed required rack depth, see
5).
• Changed typical power consumption, see
(page
4).
• Updated LED Flash Patterns, see
1.2
• Added active cable support
• Added firmware upgrade section. See
196).
• Updated the Non-Op altitude specification. See
Specifications (page
1.2.1
Updated the product name
1.3
• Updated information on the 2.5" drive carrier option.
• Added torque requirements for all screws used in the enclosure.
• Updated the IOM replacement section to account for the possibility
of a firmware mismatch. See
• Updated the drive assembly installation instructions to clarify
the orientation of the drive assemblies.
Replacement (page
1.4
• Updated Compatible Drives List. See
(page
24).
• Updated the Rack Requirements. See
Requirements (page
• Updated the Firmware Upgrades. See:
196)
1.5
Added the Part Replacement Service Window. See:
Service Window (page 59)
1.6
• Updated Compatible Drives List. See
(page 24)
• Updated the Firmware Upgrade section. See
(page 196)
• Updated the Firmware Download section. See
Firmware from the Support Portal (page 198)
Comment
Power Requirements (page
Mechanical Specifications (page
Electrical Specifications
LEDs (page
Firmware Upgrade (page
4).
IOM Replacement (page
3.5in HDD Assembly
73).
List of Compatible Drives
Ultrastar Data102 Rack
16).
Firmware Upgrade (page
List of Compatible Drives
Revision History
CMA (page
49).
10).
Environmental
60).
Part Replacement
Firmware Upgrade
Downloading
vii
Advertisement
Table of Contents
