Western Digital Ultrastar ScaleUp SE4U102 User Manual page 189

User Guide
Figure 207: Shipping Bracket Screw Locations (CMA Lite)
Step 47 : Install the PSU.
a. Align the PSU in the orientation shown in the following image, and slide the PSU into the slot
until it seats fully into the chassis.
Figure 208: Installing the PSU
b. Plug the power cable into the receptacle at the back of the PSU.
c. Attach the cable retention mechanism.
For PSUs with the clip-style retention mechanism, loop the clip around the power cable and
pinch it until the clip catches and locks in place. Then slide the clip forward until it stops
near the cable connector.
3. Support
3.9 Chassis Replacement
173