User Guide
Figure 85: Rack Spacer Nut Plate Installation
c. Using a T15 Torx screwdriver, tighten the top captive screw to secure the mounting plate in
place. Tighten the remaining captive screws at the bottom of the spacer bracket, and torque
all four of the captive screws to 3.38-3.61 Nm / 30-32 in-lbf.
Figure 86: Captive Screws
d. Repeat these steps to install the remaining rack spacer.
Step 13 : Install the chassis into the rails.
3. Support
3.7 CMA Replacement
90