Table of Contents
Advertisement
User Guide
9:0:1295:0
end_device-9:44:10
9:0:1296:0
end_device-9:44:11
b. Issue the following command to access a single host's SMP Discover output:
smp_discover_list /dev/bsg/expander-9:39
c. Zone groups will not be visible due to zoning being disabled. All hosts will have access to
all drives.
d. Issue the following command to access all hosts smp_discover_list:
smp_discover_list --ignore /dev/bsg/expander-9:39
4.7.6 Enabling Zoning using Windows
Step 1 : From the host server, identify the SCSI devices that are associated with the Ultrastar Data102
IOMs.
a. Issue the following command:
sg_scan -s | findstr /i H4102-J
b. Identify the SCSI devices from the output. The device information follows SCSI0. The
devices appear as SCSI0:1,62,0 and SCSI0:1,124,0 bolded in the example below.
SCSI0:1,62,0
SCSI0:1,124,0
Step 2 : Locate the IP Address for each IOM using sg_ses page 7.
a. Issue the following command:
sg_ses <dev> -p7 | finstr /i esce
9:0:1376:0
9:0:1388:0
end_device-9:44:7
9:0:1377:0
9:0:1389:0
end_device-9:44:8
Note: Repeat this substep for all expanders.
Note: Repeat this substep for all hosts.
Note: The operating system associates each SEP device as a SCSI device. The
SCSI device of the SEP can be used to get status from or control elements within
the enclosure.
claimed=0 pdt=dh
0428
claimed=0 pdt=dh
0428
end_device-9:41:24
end_device-9:41:25
HGST
H4102-J
HGST
H4102-J
4. Management
4.7 Zoning
0101
0101
234
Advertisement
Table of Contents
