Western Digital Ultrastar ScaleUp SE4U102 User Manual page 168

User Guide
Figure 174: Chassis Handle Operation
Step 13 : Remove all of the drives from the chassis before uninstalling the chassis. Be prepared to label the
drives as they are removed so they can be reinstalled in the same location in the new chassis.
Step 14 : Follow these steps to remove a 3.5in HDD Assembly.
a. Find the latch release mechanism on the 3.5in HDD Assembly being removed.
b. Insert a finger and a thumb into the latch release and pinch to unlatch the 3.5in HDD
Assembly.
Figure 175: Unlatch Drive Carrier (IOM Not Shown)
c. Lift the 3.5in HDD Assembly free from the enclosure.
3. Support
3.9 Chassis Replacement
152