Western Digital Ultrastar ScaleUp SE4U102 User Manual page 125

User Guide
Figure 113: Open Baskets
b. Remove one cable at a time from the arm, making sure not to put too much strain on the
arm.
Step 6 : Remove the CMA(s).
a. Release all of the connectors that attach the CMA(s) to the enclosure and the rail.
There are three total connections that need to be released, one at the elbow and two at
the opposite end.
b. To release a connector, press the blue latch release button and pull the connector free.
Figure 114: Unlatching a CMA Connector
Step 7 : Complete the previous step for the second CMA.
3. Support
3.8 Rails Replacement
109