Table of Contents
Advertisement
User Guide
Step 5 : In the Review & Download Files section, review the selected files to ensure that all intended
files are included in the list.
Step 6 : If needed, remove an unwanted file by clicking its red X.
Step 7 : Select the appropriate archive file format by clicking either Zip or Tar.
Step 8 : Click the Download Files button to download the selected files.
4.3.3 Linux Upgrade Preparation
To prepare the firmware package for download, do the following:
Step 1 : Connect the Ultrastar Data102 to a standard SAS HBA or a RAID SAS HBA hosted on the Linux
Server that presents the Enclosure Services Processor to the Linux operating system. The
Enclosure Services Processor in the Ultrastar Data102 will be referred to as an IOM.
Note: Filenames will vary, depending on the options chosen in the Identify
Product section.
Important: Do not unzip/extract the tar.gz file. Doing so will result in errors during
the firmware upgrade process.
4. Management
4.3 Firmware Upgrade
200
Advertisement
Table of Contents
