Table of Contents
Advertisement
User Guide
1.1 Ultrastar Data102 Description
Figure 2: Ultrastar Data102
The Ultrastar Data102 is a 4U form factor, high availability, high density, rack-mounted storage enclosure.
It is capable of hosting up to 102 HDD drives (SAS or SATA). The maximum data storage capacity of the
Ultrastar Data102 is 2.0PB using 20TB Ultrastar HC650 drives . (For a full list of compatible drives and total
storage capacities, see the
of 200-240 VAC and consumes ~1300W of power under typical conditions. It requires a maximum of
1600W (Delta PSU) / 1800W (Artesyn PSU) at full load.
It is designed to fit within a 4U rack space and requires 1181-1197 mm (46.5in. - 47.13in.) of usable rack space,
frame to frame . A fully loaded system will add 118.8 kg / 262 lbs. of static load when fully loaded with
drives.
• 4U Storage Enclosure
• Supports up to 102 Drives
• Supports 3.5" drives in the 102 available drive bays.
• Up to 12W per drive slot for the 102 data storage drives (Cannot exceed 85A on the 5V rail)
• House and control four (4) N+1 redundant 80mm rear fans
• House and control a dual rotor 40mm internal IOM Fan
• Controlled by two (2) redundant I/O Modules
• Powered by two (2) redundant 1600W or 1800W PSUs
• Supports High Line (220-240 VAC) Input Power
• Full high availability with independent dual paths to all HDDs
• Toolless replacement of all Customer Replaceable Units (CRUs)
• Fits within a standard EIA-310 rack including all necessary cable management (see
Hardware Configuration (page
• Supports up to 3m passive SAS cables (limited to 3m or less) or active cables (any length) (see
Cabling (page
1.
SATA based models will only include 1 IOM
List of Compatible Drives (page
18))
22))
1.1 Ultrastar Data102 Description
24).) The enclosure runs on an input voltage
1
1. Overview
Compatible Rack
SAS
2
Advertisement
Table of Contents
