User Guide
Step 3 : If applicable, repeat these steps to set the OOBM IP address for the second I/O module.
4.5.3 Upgrading Firmware with OOBM
The following procedure should be followed to upgrade the firmware of the Ultrastar Data102 using the
OOBM API.
Step 1 : Open a web browser, go to:
package for the Ultrastar Data102 .
Step 2 : Extract the downloaded zip file and place file in a location that is accessible to the Ultrastar
Data102 .
Step 3 : Make a POST call to the UpdateService object using the
POST /redfish/v1/UpdateService/Actions/UpdateService.SimpleUpdate HTTP/1.1
Content-Type: application/json;charset=utf-8
Content-Length: <computed length>
OData-Version: 4.0
Authorization: Basic userid:password
a. In the body of the POST, list the
parameter to the file location of the bin file.
Linux Example:
{"ImageURI": "tftp://<tftp IP address>/HGST_Ultrastar-DATA60-DATA102-
Server60-8_SEP_bundle_3010-007_3.1.11.tar.gz"}
Windows Example:
{\"ImageURI\":\"https://<https IP address>/HGST_Ultrastar-DATA60-DATA102-
Server60-8_SEP_bundle_3010-007_3.1.11.tar.gz\"}
Step 4 : To check the status of this process, make a GET request to the following target:
curl -G -k -u admin:admin -H "Content-type: application/json" https://<IP
address>/redfish/v1/UpdateService/Actions/UpdateService.SimpleUpdate/Status
a. Execute the command until you see the following result:
{
Note: IOMA cannot be used to modify IOMB's OOBM IP address, and vice versa.
https:/
Note: TFTP and HTTPS are supported.
Note: This command may need to be issued multiple times until it reports a
completed status. This should be done before completing the remainder of the
procedure.
"ErrorCode":0,
"StatusCode":2,
"Description":"FW update completed. Waiting for activation.",
"EstimatedRemainingMinutes":0
4.5 OOBM Management Overview
/portal.wdc.com/Support/s/, and download the firmware
SimpleUpdate
as the data parameter, and set the value of this
ImageURI
4. Management
action.
219