Table of Contents
Advertisement
User Guide
2.6 Rails
Figure 27: Ultrastar Data102 Rails
2.6.1 Rails Specifications
Specification
Length
Rails Kit (CMA
Standard) Part Number
Rails Kit (CMA Lite) Part Number
Hot Swappable?
FRU or CRU?
Weight
12.
Listed weight does not include packaging/shipping materials.
The Ultrastar Data102 is installed into a rack using a
toolless-attach rail system. Each rail is a two-piece
assembly, with one rail that attaches directly to
the chassis (inner rail) and another (outer rail) that
attaches to the rack. The inner rail comes nested
inside the outer rail and can be accessed by sliding
it out of the outer rail. The outer rails attach to the
rack and receive the chassis to support it inside
the rack. The outer rails attach to vertical rack rails,
which should be set between 32 in.-36 in . The
toolless design allows an installer to attach the
rails to a rack without any tools, which simplifies
installation. Once they are attached, they can be
secured with the included M5 screws and washers.
1028.7 mm / 40.5 in.
7.89 kg total (3.95 kg per rail) / 17.4 lbs total (8.7 per rail)
2. Components
Value
1EX0435
1EX1601
No
CRU
2.6 Rails
12
46
Advertisement
Table of Contents
