Western Digital Ultrastar ScaleUp SE4U102 User Manual page 176

User Guide
Figure 188: Cable Tie Mount Location
Step 29 : Secure the cable tray onto the enclosure using the included M3 x 8mm T10 Torx screws and the
Long T10 Torx Screwdriver. These screws should be tightened to .33-.56 Nm / 3-5 in-lbf.
Figure 189: Installing the Cable Tray
Step 30 : Extend the mid-rails out of the rack so that they are protruding from the front of the rack and the
safety latches engage.
3. Support
3.9 Chassis Replacement
160