User Guide
Figure 64: LED Pointer Orientation
Caution: To ensure proper airflow for enclosure cooling, all drive slots must be populated
with either drives or drive blanks.
Step 5 : Ensure that the enclosure has been pulled out of the rack until the rail latches engage.
Step 6 : Install each drive in the place it was removed from by following the labels or marks that were
added earlier.
Step 7 : Align the drive with the empty slot that will receive it. Lower it into the slot, ensuring that it stays
level and does not bind.
3.6 3.5in HDD Assembly Replacement
3. Support
77