Revision History - Western Digital Ultrastar Data60 User Manual

User Guide

Revision History

Date
November 2017 Revision 1.0
November 2017 Revision 1.1
December 2017 Revision 1.2
January 2018
January 2018
April 2018
May 2018
June 2018
Revision
Initial Release
• The crossbar on the CMA was changed. See
(page
• Removed Lowline power specs from
(page
• Changed required rack depth, see
5).
• Changed typical power consumption, see
Consumption (page
• Updated LED Flash Patterns, see
• Added active cable support
• Added firmware upgrade section. See
(page
• Updated the Non-Op altitude specification. See
Operational Altitude (page
Revision 1.21 Updated the product name
Revision 1.3
• Updated information on the 2.5" drive carrier option. See
Drive Carrier Description (page
• Added torque requirements for all screws used in the
enclosure.
• Updated the IOM replacement section to account for the
possibility of a firmware mismatch. See
(page
• Updated the drive assembly installation instructions to clarify
the orientation of the drive assemblies.
Replacement (page
Revision 1.4
• Updated Compatible Drives List. See
(page
• Updated the Rack Requirements. See
Requirements (page
• Updated the Firmware Upgrades. See:
(page 163)
Revision 1.5 Added the Part Replacement Service Window. See:
Replacement Service Window (page 61)
Revision 1.6
• Updated Compatible Drives List. See
(page 19)
Comment
51).
16).
4).
163).
4).
61).
71).
19).
13).
Revision History
CMA Description
Power Requirements
Required Rack Depth (page
Typical Power
LEDs (page 7).
Firmware Upgrade
Non-
55).
IOM Replacement
Drive Assembly
List of Compatible Drives
Ultrastar Data60 Rack
Firmware Upgrade
Part
List of Compatible Drives
2.5"
v