User Guide
Figure 211: Strap-Style Cable Retention
Step 48 : Install the second PSU.
Step 49 : Install Rear Fan
a. Orient the rear fan as shown in the following image.
b. Insert the rear fan into the housing as shown in the following image.
Figure 212: Installing the Rear Fan
Step 50 : Install the rest of the rear fans into the rear of the enclosure.
Step 51 : Install the CMA(s).
Note: The standard CMA has two arms, labeled "upper" and "lower." The lower
arm should have the elbow on the left side and be installed first; the upper arm
should have the elbow on the right side and be installed last.
3. Support
3.9 Chassis Replacement
175