Western Digital Ultrastar ScaleUp SE4U102 User Manual page 169

User Guide
Figure 176: Removing 3.5in HDD Assembly
Step 15 : Follow the previous step for each drive in the enclosure. Attach a label or mark the drives with
the drive slot they were removed from in order to add them to the same slot in the future. Store
the drives in an ESD safe location until the drives are ready to be installed back into an enclosure.
Step 16 : Uninstall the IOM(s).
a. Locate the latch release on the IOM and press it in the direction shown in the following
image.
Figure 177: Unlatching the IOM
b. Grasp both handles, one handle in each hand, and lift evenly with both hands to ensure the
IOM comes out straight. This will prevent any damage to the pins on the internal connectors.
3. Support
3.9 Chassis Replacement
153