Fluke 5520A Operator's Manual page 186

5520A
Operators Manual
5-35. Commands for IEEE-488 Only
The command graphic
488 interface. This is all the commands, except for those used for RS-232 operations.
(See "Commands for RS-232 Only.") All commands are transferred over the IEEE-488
as data, except for the commands LOCAL, REMOTE, and LOCKOUT, which are
implemented per IEEE Standards as messages (see Table 5-7).
[1]
5-32
x
Table 5-7. Commands for IEEE-488 Only
IEEE-488 Message [1]
GTL
GTR
LLO
SDC, DCL
GET
SPE, SPD
See "How IEEE-488 Operates" later in this chapter.
IEEE-488 indicates commands that are used for the IEEE-
Command Representation
LOCAL command
REMOTE command
LOCKOUT command
Clear the device
Execute a group trigger
Print the serial poll string