JLG 1200SJP Service Maintenance Manual page 87

31. Insert the splined shaft (14) in the equipment
(6689960240).
32. Insert the 2nd washer (12) correctly in the splined shaft
(14).
33. Torque the 2 screws M5x16, grade 8.8, of the cover to
18.4 ft.lbs. (25 Nm).
3121142
34. By using pliers, assemble the elastic ring (11) into its seat
in the splined shaft (14).
35. Insert the disengagement shaft kit (15) in the flanged
hub (31).
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-41