JLG 1200SJP Service Maintenance Manual page 394

Hide thumbs Also See for 1200SJP:
Table of Contents

Advertisement

SECTION 6 - JLG CONTROL SYSTEM
Table 6-2. Machine Configuration Programming Information - Version P7.X to Present
Configuration Digit
GLOW PLUG:
5
STARTER LOCKOUT:
6
ENGINE SHUTDOWN:
7
TILT:
8
Note: Any of the selections above will light the tilt lamp when a tilted condition occurs and will sound the platform alarm when the machine is also above elevation.
SOFT TOUCH:
9
6-18
Number
0
NO GLOW PLUGS: No glow plugs installed.
1
AIR INTAKE: Glow plugs installed in the air intake on the manifold.
2
IN-CYLINDER: Glow plugs installed in each cylinder.
0
DISABLED: Automatic pre-glow time determined by ambient air temperature; engine start
can be attempted at any time during pre-glow.
1
ENABLED: Automatic pre-glow time determined by ambient air temperature; engine start is NOT permit-
ted until pre-glow is finished.
0
DISABLED: No engine shutdown.
1
ENABLED: Shutdown engine when coolant temperature is greater than 110 deg. C or the oil
pressure is less than 8 PSI.
1
5 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more
than 5 degrees and above elevation; also reduces drive speed to creep.
2
4 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 4 degrees
and above elevation; also reduces drive speed to creep.
3
3 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 3 degrees
and above elevation; also reduces drive speed to creep.
4
4 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 4
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.
5
3 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 3
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.
0
NO: No soft touch system installed.
1
YES: Soft touch system installed.
Description
– JLG Lift –
Default
Number
2
0
1
1
0
3121142

Advertisement

Table of Contents
loading

This manual is also suitable for:

1350sjp

Table of Contents