JLG 1200SJP Service Maintenance Manual page 85

19. Assemble the 1st reduction assembly (16).
20. Insert the 1st stage sun gear (10).
21. Assemble the O-ring seal (9) into its seat in the end
cover (7).
3121142
22. Place the end cover (7) on the gearbox housing (23).
23. Tighten the 10 socket head screws M10x25 (1),grade
12,9, by a torque wrench at 62.7 ft.lbs. torque (85 Nm).
24. Insert the plugs (6) into the oil draining-filling holes of
the end cover (7). Torque the plugs to 52 ± 7 ft.lbs.
(70±10 Nm).
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-39