SECTION 3 - CHASSIS & TURNTABLE
13. Assemble correctly the spacers (21) on the pins of the
flanged hub (31).
14. Place the 5 planet assemblies of the 3rd reduction (20) in
the flanged hub's pin (31).
15. By using a rubber hammer and a metal stopper push the
planet assemblies of the 3rd reduction (20) against the
shoulder until assembly is complete.
3-38
16. By using pliers, assemble the circlips (19) in the flanged
hub pin seats (31).
17. Assemble the 2nd reduction assembly (18).
18. Insert the 2nd stage sun gear (17).
– JLG Lift –
3121142