Motor And Brake Assembly - JLG 1200SJP Service Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Motor and Brake Assembly

1. Place O-ring (27) onto end of Brake (26) and locate brake
into pilot of cover.
2. Place Gasket (31) onto the brake face and line up the
holes.
3. Place Motor (10) into Brake pilot against the Gasket (31).
3-76
10. Hydraulic Motor
26. Hydraulic Brake
27. O-Ring
Figure 3-45. Swing Drive - Motor and Brake Assembly
– JLG Lift –
4. Assemble Lift Lugs (28) onto Hex Bolts (29). Assemble
Hex Bolts (29) with Lift Lugs through the Motor (10) and
Brake (26) against the motor flange. Torque to 35 ft-lbs.
5. Fill Brake (26) with 2.7 oz. (80cc) of BRAKOILVG32
(DTE24).
28. Lift Lug
29. Bolt
31. Gasket
3121142