JLG 1200SJP Service Maintenance Manual page 77

19. Remove the cap nut (5).
20. Remove the pin (3).
21. Remove the O-ring seal (2) from its seat in the end cover
(7).
3121142
22. Unscrew the draining-filling-level oil plugs (6) by a male
hex head wrench.
23. Unscrew the 10 screws M10X25 (1), grade 12,9, from the
end cover (7).
24. Remove the end cover (7).
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-31