JLG 1200SJP Service Maintenance Manual page 109

17. Prepare the closing cover fitting the O-ring 5-582 suit-
ably greased and lock it with the shimming ring. Lubri-
cate the bearings.
18. Fit the O-Ring 2-177 suitably greased, mount the cover
locking it with the BR250 ring.
3121142
19. Fit the O-Ring 2-163 suitably greased, onto the motor
coupling flange S-D LC/KC. Mount the flange on the
spindle with 6 M8x25 socket cap screws at the torque of
2.4daNm with LOCTITE 243 Insert the pin and carry out
the rotation test according to PGQ-22 standard.
20. Mount the release cover fastening it with 2 M6x20 hex-
agonal screws at the torque of 1daNm. Mount the 1/
4"GAS plugs on the cover at the torque of 1daNm.
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-63