Extension Connector Type - Mitsubishi Electric MELSEC iQ-F Series User Manual

Extension connector type

Item
Current 5VDC
consumption
24VDC
Mass (weight)
External color
■Input specifications
Number of input points
Connection type
Input type
Input signal voltage
Input signal current
Input impedance
Input On
sensitivity
Off
current
Input On
response time
Off
Input signal format
(Input sensor form)
Indication of input operation
■Output specifications
Number of output points
Connection type
Output type
External power supply
Output circuit insulation
Indication of output
operation
Max. load
Open circuit leakage
current
Off  On
Response
time
On  Off
Voltage drop when ON
*1 Current consumption when external power supply is used for the input circuit.
6 I/O MODULE PERFORMANCE SPECIFICATIONS
126
6.3 I/O Module
Specifications
FX5-C32ET/D FX5-C32ET/DS-TS
120mA
*1
165mA (100mA )
Approx. 0.25kg Approx. 0.15kg
Munsell 0.6B7.6/0.2
16 points
Connector Spring clamp terminal block
Sink Sink/source
24VDC +20%, -15%
4.0mA/24VDC
5.6k
3.0mA or more
1.5mA or less
50s or less
150s or less
No-voltage contact input No-voltage contact input
Sink: NPN open collector Sink: NPN open collector transistor
transistor Source: PNP open collector transistor
LED turns on when input is on.
With FX5-C32ET/D(SS), the input/output is switched with the DISP switch IN/OUT.
16 points
Connector Spring clamp terminal block
Transistor/sink output
5-30VDC
Photo-coupler insulation
LED turns on when output is on.
0.1A/point
The total load current of resistance loads per common terminal should be the following value.
• 8 output points/common terminal: 0.8A or less
0.1mA/30VDC
0.2ms or less/100mA (at 24VDC)
0.2ms or less/100mA (at 24VDC)
1.5V or less
FX5-C32ET/DSS FX5-C32ET/DSS-TS
Connector Spring clamp terminal block
Connector Spring clamp terminal block
Transistor/source output