Mitsubishi Electric MELSEC iQ-F Series User Manual page 74

No. Name
[12] Input display LED
[13] Output display LED
[14] Output terminal
[15] SD memory card disable switch
[16] SD memory card slot
[17] RUN/STOP/RESET switch
Left side/Right side
[1]
No. Name
[1] Expansion adapter connector cover
[2] Extension connector cover
[3] DIN rail mounting groove
[4] Nameplate printing
[5] Genuine product certification label
Products that do not have the genuine product certification label or nameplate are not covered by the
warranty.
3 PART NAMES
72
3.1 CPU Module
Description
Turns on when input is on.
Turns on when output is on.
Terminals for output.
For details on the terminal layout, refer to Page 101 Power, input/output terminal block.
Switch for disabling access to the SD memory card when the SD memory card is to be removed.
Slot for inserting an SD memory card.
Switch for operating the CPU module.
RUN: Runs the program
STOP: Stops the program
RESET: Resets the CPU module (Hold the switch on the RESET side for approximately 1 second.)
Description
Cover for protecting the expansion adapter connector.
Cover for protecting the subsequent extension connector.
The module can be installed on a DIN46277 rail (width: 35mm).
The product model name, manufacturer's serial number, power supply specifications, and MAC address
are shown.
is a mark that instructs the use of a cable with an appropriate temperature rating (80 or more) for
wiring.
Genuine product certification label to prevent counterfeiting
[2]
[3]
[4]
[5]