Mitsubishi Electric MELSEC iQ-F Series User Manual page 65

With the cover open
[1]
[2]
[3]
No. Name
[1] Expansion board connector
[2] RUN/STOP/RESET switch
[3] Built-in USB communication connector
[4] Terminal names
[5] Terminal
[5] [5] [5] [5] [5]
[4]
[4] [4] [4] [4] [4]
[5] [5] [5] [5] [5]
Description
Connector for connecting an expansion board.
Switch for operating the CPU module.
RUN: Runs the program
STOP: Stops the program
RESET: Resets the CPU module (Hold the switch on the RESET side for approximately 1 second.)
Connector for connection with engineering tool.
The signal names for power supply, input, and output terminals are shown.
shows a function grounding terminal.
Terminals for power, input, and output.
For details on the terminal layout, refer to Page 101 Power, input/output terminal block.
3
3 PART NAMES
63
3.1 CPU Module