Transistor output
Item
Number of Output Points
Connection type
Output type
External power supply
Max. load
Open circuit leakage current
Voltage drop when ON
Response time
Indication of output operation
*1 Area-specific model
*2 When two common terminals are connected outside the I/O module, resistance load is 1.6A or less.
*3 For a connector type module, keep the DISP switch on the IN side.
5 CPU MODULE PERFORMANCE SPECIFICATIONS
96
5.4 Output Specifications
Output specifications
FX5S
FX5UJ
FX5S-30MT: 14 points
FX5UJ-24MT: 10 points
FX5S-40MT: 16 points
FX5UJ-40MT: 16 points
FX5S-60MT: 24 points
FX5UJ-60MT: 24 points
*1
FX5S-80MT
: 32 points
Non-removable terminal
Removable terminal block (M3 screws)
block (M3 screws)
• Transistor (sink)
• Transistor (source)
5-30VDC
0.5A/point
The total load current per common terminal should be the
following value.
• 3 output points/common terminal: 0.6A or less
• 4 output points/common terminal: 0.8A or less
For details on the common, refer to Page 101 Power,
input/output terminal block.
0.1mA or less/30VDC
Y0 to Y3: 1.0V or less
Y0 to Y2: 1.0V or less
Y4 or later: 1.5V or less
Y3 or later: 1.5V or less
Y0 to Y3: 5s or less/10mA
Y0 to Y2: 2.5s or less/
or more (5-24VDC)
10mA or more (5-24VDC)
Y4 or later: 0.2ms or less/
Y3 or later: 0.2ms or less/
200mA or more (24VDC)
200mA or more (24VDC)
LED turns on when output is on.
FX5U
FX5UC
FX5U-32MT: 16 points
FX5UC-32MT: 16 points
FX5U-64MT: 32 points
FX5UC-64MT: 32 points
FX5U-80MT: 40 points
FX5UC-96MT: 48 points
FX5UC-32M:
• Connector
• Spring clamp terminal
FX5UC-64M, FX5UC-
96M:
• Connector
0.5A/point
Y0 to Y3: 0.3A/point
The total load current per
Y4 or later: 0.1A/point
common terminal should be
The total load current per
the following value.
common terminal should be
• 4 output points/common
the following value.
terminal: 0.8A or less
• 8 output points/common
• 8 output points/common
terminal: 1.6A or less
For details on the common,
refer to Page 101
For details on the common,
refer to Page 101
Power, input/output terminal
Power, input/output terminal
block.
block.
Y0 to Y3: 1.0V or less
Y4 or later: 1.5V or less
Y0 to Y3: 2.5s or less/10mA or more (5-24VDC)
Y4 or later: 0.2ms or less/
Y4 or later: 0.2ms or less/
200mA or more (24VDC)
100mA (24VDC)
LED turns on when output is
on.
block
*2
terminal: 0.8A or less
*3