Mitsubishi Electric MELSEC iQ-F Series User Manual page 155

Installation of extension module (extension cable type)
Back side Back side
A
2
C
B
C
1.
Make mounting holes on the mounting surface
according to the external dimensions diagram.
2.
Push in the DIN rail mounting hook (A in the figure) of
the extension module (extension cable type). When the
DIN rail mounting hook is not pushed in, the screw hole
is covered, and the extension module cannot be
mounted. (This procedure may not be required,
depending on the model.)
3.
Align the extension module (extension cable type) (B in
the figure) with the holes, and secure it with M4 screws
(C in the figure).
12 INSTALLATION
153
12.2 Installation Methods
12