Mitsubishi Electric MELSEC iQ-F Series User Manual page 93

Item
Input response time
(Delay time of the hardware filter)
*3
Input response time
(Digital filter setting value)
Input signal format (Input sensor
form)
Indication of input operation
*1 Area-specific model
*2 When capturing pulses of a response frequency of 50 to 100kHz for FX5S/FX5UJ CPU modules or 50 to 200kHz for FX5U/FX5UC CPU
modules, refer to Page 181 When capturing high-speed pulses.
*3 When using this product in an environment with much noise, set the digital filter.
*4 For a connector type module, keep the DISP switch on the IN side.
Specifications
FX5S FX5UJ
• X0, X1, X3, X4
On: 5s or less
Off: 5s or less
• X2, X5, X6, X7
On: 30s or less
Off: 50s or less
• X10 to X17
On: 50s or less
Off: 150s or less
• X20 or later
On: Approx. 10ms
Off: Approx. 10ms
X0 to X17: None, 10s, 50s, 0.1ms, 0.2ms, 0.4ms,
0.6ms, 1ms, 5ms, 10ms (default), 20ms, 70ms
X20 or later: Not supported
No-voltage contact input
Sink: NPN open collector transistor
Source: PNP open collector transistor
LED turns on when input is on.
FX5U
FX5U-32M:
• X0 to X5
On: 2.5s or less
Off: 2.5s or less
• X6 to X17
On: 30s or less
Off: 50s or less
FX5U-64M, FX5U-80M:
• X0 to X7
On: 2.5s or less
Off: 2.5s or less
• X10 to X17
On: 30s or less
Off: 50s or less
• X20 or later
On: 50s or less
Off: 150s or less
None, 10s, 50s, 0.1ms, 0.2ms, 0.4ms, 0.6ms, 1ms,
5ms, 10ms (default), 20ms, 70ms
5 CPU MODULE PERFORMANCE SPECIFICATIONS
5.3 Input Specifications
FX5UC
FX5UC-32M:
• X0 to X5
On: 2.5s or less
Off: 2.5s or less
• X6 to X17
On: 30s or less
Off: 50s or less
FX5UC-64M, FX5UC-
96M:
• X0 to X7
On: 2.5s or less
Off: 2.5s or less
• X10 to X17
On: 30s or less
Off: 50s or less
• X20 or later
On: 50s or less
5
Off: 150s or less
LED turns on when input is
*4
on.
91