Mitsubishi Electric MELSEC iQ-F Series User Manual page 238

Removal procedure
■FX5S CPU module
(3)
(2)
(1)
■FX5UJ CPU module
(3)
(1)
■FX5U CPU module
(3)
14 PROCEDURES BEFORE OPERATION
236
14.4 Inserting and Removing the SD Memory Card
(2)
(1)
(2)
1.
Open the SD memory card slot cover (1).
2.
Slide the SD memory card disable switch (2) of the FX5-
SDCD to the OFF side (upward) to and press it for one
second or more to stop access to the card.
3.
The CARD LED (3) flashes during the access stop
operation, and then the LED turns off when the
operation is completed.
4.
Push in the SD memory card once, and then pull it out
straight. Then, slide the SD memory card disable switch
to the ON side (down).
5.
Close the SD memory card slot cover (1).
1.
Press the SD memory card disable switch (1) for one
second or more to stop access to the SD memory card.
The CARD LED (2) flashes during the access stop
operation, and then the LED turns off when the
operation is completed.
2.
Push in the SD memory card (3) once, and then pull it
out straight.