Installation Methods - Mitsubishi Electric MELSEC iQ-F Series User Manual

12.2

Installation Methods

This section describes the installation methods.
There are three installation methods as listed in the following table.
Installation methods
Installing on DIN rail
Installing directly
Example of combination of installation on
DIN rail and direct installation
Keep a space of about 2mm between the products.
Installing on DIN rail
• The programmable controller can be installed on a 35mm wide DIN46277 rail.
• The programmable controller can be easily moved and removed.
• For installation of the programmable controller using a DIN rail in the control panel, additional length of the DIN rail
thickness is required.
For details on the procedures for installing on and detaching from a DIN rail, refer to Page 151 Installing on DIN rail.
Installing directly
• The programmable controller can be installed directly in the control panel with M4 screws.
For details on installing directly, refer to Page 152 Installing directly.
FX5S FX5UJ
 
 
 
FX5U FX5UC
 
 
 
12 INSTALLATION
12.2 Installation Methods
12
149