Layout In Control Panel - Mitsubishi Electric MELSEC iQ-F Series User Manual

Layout in control panel

The programmable controller components can be laid out in one stage or in two stages (upper and lower).The connecting
procedures in each case are explained below.
Extension devices can be connected on the left and right sides of the CPU module of the programmable controller. (For the
FX5S CPU module, extension devices can be connected on the left of the CPU module located in the middle.)
Keep a space of at least 50mm between the module main body or other devices and structure.
Also, separate the programmable controller from high-voltage lines, high-voltage devices, and power devices when possible.
Failure to do so may cause fire, equipment failures or malfunctions.
When extension devices are intended to add, keep necessary spaces on the left and right sides.
Configuration in 1-stage layout
CPU module
Configuration in 2-stage layout
Other device
For product dimensions, refer to the external dimensions diagram of each product.
12 INSTALLATION
148
12.1 Installation Positions
≥50mm
CPU module
Powered
input/output
module
Extended extension
cable
• FX5-30EC
• FX5-65EC
≥50mm