Boot Operation - Mitsubishi Electric MELSEC iQ-F Series User Manual

Boot operation

Boot operation cannot be performed from the SD memory card
Item to check
Check for errors in the CPU module.
Check that the file is set in the boot file settings of the parameters.
Check that the file is set in the program file settings of the parameters.
Check that the file to run is stored in the SD memory card.
If the boot operation cannot be performed even after the items shown above are checked, there may be a hardware issue.
Consult your local Mitsubishi Electric representative.
15 TROUBLESHOOTING
262
15.7 Troubleshooting for Each Symptom
Action
Remove the cause of the error.
Set the file in the parameters.
Store the file to run.