Fx5Uc Cpu Module - Mitsubishi Electric MELSEC iQ-F Series User Manual

FX5UC CPU module

Connector type
[5]
[1]
[4]
[3]
[2]
[1]
[10] [9]
No. Name
[1] Expansion adapter connecting hooks
[2] Built-in RS-485 communication
terminal block
[3] Built-in Ethernet communication
connector
[4] Operation status PWR LED
display LED
ERR LED
P.RUN LED
BAT LED
CARD LED
SD/RD LED
RD LED
SD LED
[5] Input connector
[6] Extension module connecting hook
[7] I/O display LED
[8] DISP switch
[9] Output connector
[10] DIN rail mounting hook
[11] Input terminal
Spring clamp terminal
block type
[11]
[6]
[7]
[8]
[6]
[14]
Description
When connecting an expansion adapter, secure it with these hooks.
Terminal block for connection with RS-485-compatible devices
Connector for connection with Ethernet-compatible devices. (with cap)
For a connector that is not connected with the Ethernet cable, attach the cap provided as an accessory to
block dust or dirt.
For details, refer to MELSEC iQ-F FX5 User's Manual (Ethernet Communication).
Indicates whether the CPU module is powered or not.
On: Powered
Off: Not powered or hardware error
Indicates the error status of the CPU module.
On: Error or hardware error
Flashing:Factory default setting, error, hardware error, or resetting
Off: Normal operation
Indicates the program running status.
On: Normal operation
Flashing:Paused, stopped (program mismatched), or online program change (PAUSE or RUN was set at
the time of online program change.)
Off: Stopped or stop error
Indicates the battery status.
Flashing:Battery error
Off: Normal operation
Indicates whether an SD memory card can be used or not.
On: Can be used or cannot be removed
Flashing:In preparation
Off: Not inserted or can be removed
Turns on when the CPU module is sending or receiving data through built-in Ethernet communications.
Turns on when the CPU module is receiving data through built-in RS-485 communications.
Turns on when the CPU module is sending data through built-in RS-485 communications.
Connector for connecting input signal cables.
For details on the terminal layout, refer to Page 101 Power, input/output terminal block.
When connecting an expansion module, secure it with these hooks.
Turns on when input or output is on.
Switches between input/output of the I/O display LED.
Connector for connecting output signal cables.
For details on the terminal layout, refer to Page 101 Power, input/output terminal block.
Hook for mounting a CPU module on a DIN rail of DIN46277 (width: 35mm).
Terminals for input.
For details on the terminal layout, refer to Page 101 Power, input/output terminal block.
With cover open
[17]
[16]
[12]
[15]
[13]
3
3 PART NAMES
71
3.1 CPU Module