The following table describes the diagnostic tests available in menu 24.4 for and the connections.
FIELD
Reset xDSL
Ping Host
Reboot System
Command Mode
Host IP Address
18.5 Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be found by
typing help or ? at the command prompt.
Copyright (c) 1994 - 2002 ZYXEL
ras> ?
Valid commands are:
sys
wan
ipsec
System Information and Diagnosis
Table 18-4 System Maintenance Menu — Diagnostic
Re-initialize the xDSL link to the telephone company.
Ping the host to see if the links and TCP/IP protocol on both systems are working.
Reboot the Prestige.
Type the mode to test and diagnose your Prestige using specified commands.
If you typed 12 to Ping Host, now type the address of the computer you want to ping.
exit
poe
ppp
Figure 18-10 Command Mode
Prestige 652 ADSL Security Router
DESCRIPTION
device
ether
config
ip
bridge
hdap
18-9