Prestige 652 ADSL Security Router
25.3.1 My IP Address
My IP Addr is the WAN IP address of the Prestige. If this field is configured as 0.0.0.0, then the Prestige
will use the current Prestige WAN IP address (static or dynamic) to set up the VPN tunnel. If the My IP
Addr changes after setup, then the VPN tunnel will have to be rebuilt.
25.3.2 Secure Gateway Address
Secure Gateway Addr is the WAN IP address or domain name of the remote IPSec router (secure gateway).
If the remote secure gateway has a static public IP address, enter it in the Secure Gateway Addr field.
You may alternatively enter the remote secure gateway's domain name in the Secure Gateway Addr field.
This also works when the remote secure gateway uses DDNS. This way your Prestige can find the remote
secure gateway, even if it has a dynamic WAN IP address.
If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter 0.0.0.0 in the
Secure Gateway Addr field. In this case only the remote secure gateway can initiate SAs. This may be
useful for telecommuters initiating a VPN tunnel to the company network. See the following table for an
example configuration.
You can configure multiple SAs to simultaneously connect through the same secure gateway. In this case,
you must configure the SAs to have the same Negotiation Mode and Pre-Shared Key (Menu 27.1.1.1 IKE
Setup).
Table 25-2 Telecommuter and Headquarters Configuration Example
My IP
address:
Secure
Gateway IP
Address:
25-4
TELECOMMUTER
0.0.0.0 (dynamic IP address
assigned by the ISP)
Public static IP address or
domain name
HEADQUARTERS
Public static IP address
0.0.0.0
With this IP address only the
telecommuter can initiate the IPSec
tunnel.
VPN/IPSec Setup