ZyXEL Communications Prestige 652 User Manual page 263

Zyxel adsl security router user's guide
Hide thumbs Also See for Prestige 652:
Table of Contents

Advertisement

FIELD
field.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Range, this is the end (static) IP address, in a range of computers on the
LAN behind your Prestige.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
SUBNET, this is a subnet mask on the LAN behind your Prestige.
Encap
This field displays Tunnel mode or Transport mode. See earlier for a
discussion of these. You need to finish configuring the VPN policy in menu
27.1.1.1 or 27.1.1.2 if ??? is displayed.
IPSec
This field displays the security protocols used for an SA. ESP provides
Algorithm
confidentiality and integrity of data by encrypting the data and
encapsulating it into IP packets. Encryption methods include 56-bit DES
and 168-bit 3DES. NULL denotes a tunnel without encryption.
AH (Authentication Header) provides strong integrity and authentication
by adding authentication information to IP packets. This authentication
information is calculated using header and payload data in the IP packet.
This provides an additional level of security. AH choices are MD5 (default
- 128 bits) and SHA -1(160 bits).
Both AH and ESP increase the Prestige's processing requirements and
communications latency (delay).
You need to finish configuring the VPN policy in menu 27.1.1.1 or 27.1.1.2
if ??? is displayed.
Key Mgt
This field displays the SA's type of key management, (IKE or Manual).
Remote
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Addr Start
Single, this is a (static) IP address on the network behind the remote
IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Range, this is the beginning (static) IP address, in a range of computers
on the network behind the remote IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
SUBNET, this is a (static) IP address on the network behind the remote
IPSec router.
This field displays N/A when you configure the Secure Gateway Addr
field in SMT 27.1.1 to 0.0.0.0.
VPN/IPSec Setup
Table 25-3 Menu 27.1 — IPSec Summary
DESCRIPTION
Prestige 652 ADSL Security Router
ESP DES MD5
EXAMPLE
Tunnel
IKE
172.16.2.40
25-7

Advertisement

Table of Contents
loading

Table of Contents