Figure 21-2 Menu 24.11 - Remote Management Control; Table 21-1 Menu 24.11 - Remote Management Control - ZyXEL Communications Prestige 652 User Manual

TELNET Server:
Server Port = 23
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80
Secured Client IP = 0.0.0.0
Press Space Bar to Toggle.
Figure 21-2 Menu 24.11 – Remote Management Control
FIELD
TELNET Server Each of these read-only labels denotes a service that you may use to
FTP Server remotely manage the Prestige.
Web Server
Server Port This field shows the port number for the remote management service.
You may change the port number for a service if needed, but you must
use the same port number to use that service for remote management.
Server Access Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable.
Secured Client IP The default 0.0.0.0 allows any client to use this service to remotely
manage the Prestige. Enter an IP address to restrict access to a client
with a matching IP address.
This field is N/A when the Server Access field is set to Disable.
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
21.6.1 Remote Management Limitations
Remote management from the LAN or WAN will not work when:
Remote Management
Menu 24.11 - Remote Management Control
Press ENTER to Confirm or ESC to Cancel:
Table 21-1 Menu 24.11 – Remote Management Control
Prestige 652 ADSL Security Router
Server Access = LAN only
Server Access = LAN only
Server Access = LAN only
DESCRIPTION EXAMPLE
23
LAN Only
(default)
0.0.0.0
(default)
21-3