Figure 4-7 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup; Table 4-2 Dhcp Ethernet Setup Menu Fields - ZyXEL Communications Prestige 652 User Manual

Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
TCP/IP Setup:
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 4-7 Menu 3.2 — TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
FIELD
DHCP Setup
DHCP If set to Server, your Prestige can assign IP addresses, an IP
Client IP Pool Starting
Address
Size of Client IP Pool This field specifies the size or count of the IP address pool.
Internet Access
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No

Table 4-2 DHCP Ethernet Setup Menu Fields

default gateway and DNS servers to Windows 95, Windows NT
and other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP
address pool.
Prestige 652 ADSL Security Router
DESCRIPTION
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers
This is the IP
address of the
Prestige
EXAMPLE
Server
(default)
192.168.1.33
32
4-9