Figure 5-2 Menu 11.1 - Remote Node Profile; Table 5-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 652 User Manual

Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPP
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
FIELD
Rem Node Name
Active
Encapsulation
Multiplexing
Remote Node Configuration
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Figure 5-2 Menu 11.1 — Remote Node Profile

Table 5-1 Remote Node Profile Menu Fields

Type a unique, descriptive name of up to eight characters for this
node.
Press [SPACE BAR] and then [ENTER] to select Yes to activate or
No to deactivate this node. Inactive nodes are displayed with a
minus sign "–".
RFC-1483 is the default configuration, press [SPACE BAR] and
then [ENTER] to select either PPPoE, PPPoA (RFC-2364, PPP
Encapsulation over ATM Adaptation Layer 5) or ENET ENCAP.
PPPoA refers to RFC-2364 (PPP Encapsulation over ATM Adaptation
Layer 5).
PPPoE refers to RFC-2364 (Point-to-Point Protocol over Ethernet).
If RFC-1483 (Multiprotocol Encapsulation over ATM Adaptation
Layer 5) or ENET ENCAP is selected, then the Rem Login, Rem
Password, My Login, My Password, Telco Options and Idle
Timeout fields are not applicable (N/A).
Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either VC-based or LLC-based.
Prestige 652 ADSL Security Router
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= 0
Period (hr)= 0
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout (sec)= 0
DESCRIPTION EXAMPLE
ChangeMe
Yes
PPPoA
LLC-based
5-3