Figure 7-2 Menu 12.3.1 - Edit Bridge Static Route; Table 7-2 Edit Bridge Static Route Menu Fields - ZyXEL Communications Prestige 652 User Manual

The following table describes the Edit Bridge Static Route menu.
FIELD
Route # This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name Type a name for the bridge static route for identification purposes.
Indicates whether the static route is active (Yes) or not (No).
Active
Ether Address Type the MAC address of the destination computer that you want to bridge the
packets to.
IP Address If available, type the IP address of the destination computer that you want to bridge
the packets to.
Gateway Node Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
to eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC]
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Bridging Setup
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel:
Figure 7-2 Menu 12.3.1 — Edit Bridge Static Route

Table 7-2 Edit Bridge Static Route Menu Fields

Prestige 652 ADSL Security Router
DESCRIPTION
7-3