Table of Contents
Advertisement
Prestige 652 ADSL Security Router
LLC-based Multiplexing or PPPoA or PPPoE Encapsulation
For LLC-based multiplexing or PPP or PPPoE encapsulation, one VC carries multiple protocols with
protocol identifying information being contained in each packet header.
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
.
Figure 6-2 Menu 11.6 for LLC-based Multiplexing or PPPoA or PPPoE Encapsulation
In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for
the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM
traffic).
The following figure uses sample IP addresses to help you understand the field of My Wan Addr in menu
11.3. Refer to the previous figure LAN and WAN IPs for a brief review of what a WAN IP is. My WAN
Addr indicates the local Prestige WAN IP while Rem IP Addr indicates the peer WAN IP.
6-2
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 5400
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
ENTER here to CONFIRM or ESC to CANCEL:
Only one set of
VPI and VCI
numbers needs to
be specified.
Remote Node TCP/IP Configuration
Advertisement
Table of Contents
Troubleshooting
